NEW KIT PRE-ORDER: 1:350 EF-76 Medical Frigate

This is the Place where the GK´s can offer their kits.

NEW KIT PRE-ORDER: 1:350 EF-76 Medical Frigate

Postby Stu Pidasso » February 28th, 2017, 5:33 am

Introducing the biggest and possibly the best kit .JPG Productions has offered to date: A 1:350 scale Rebel Medical Frigate Redemption from Star Wars: The Empire Strikes Back. There are over 100 3D printed parts in this beast, and it measures a full 36 inches (91.5 cm) long, 7 inches (20.3 cm) wide, and 15 inches ( cm) tall when built. This kit is beautifully mastered by Nicholas Sagan of Cosmos Models. Many, many hours of hard work went into this, and it shows. (No Bothans died, though.)


There is an interior channel built into the kit which can fit a one-half inch (1.2cm) rod or tube to support the boom and prevent bowing/sagging. There is also a notched vertical “spine” for the many halves of the front end to fit into, so that each part lines up with its opposite mate. Yes, the kit is engineered to facilitate lighting if you choose to (but not included.) It also includes the “umbilical” so you can mount the Bandai Pocket Falcon, which is also 1:350 scale (Falcon not included.) It does not include a base, but one is in development specifically for this kit. The front section is engineered to facilitate a rod/tube up the bottom to strengthen the vertical section. Now for the price: This kit will list at $695, and is worth every penny. Shipping depends on destination, of course, but since the kit itself weighs almost 8 pounds (3.6 Kg) you can figure it out (from Ohio Zip Code 44446).


The pictures below are the master parts. To give you a sense of scale/size, those are INCH grid lines, not cms. The triangular "vanes" that go by the engine sections are 3 inches long
I will only sell these preorder kits in batches of 10 kits to prevent me from getting overwhelmed. You have 2 options: 1) 50% up front, and 50% when it’s ready to ship, or 2) 100% up front, and you will get priority treatment(bumped up the list) and free USA shipping. Payment is by Paypal, that way both of us are protected. To make payment arrangements, my Paypal address is: JPG-Productions@twc.com . PLEASE put your mailing address in the memo line, sometimes Paypal doesn’t provide it. If you need to pay by Credit/Debit card, I do have a Square account, please contact me for details. Thanks all!


All the Pictures can be found here.
.
.
.
.
.
Attachments
1.jpg
1.jpg (514.76 KiB) Viewed 1961 times
2.jpg
2.jpg (514.76 KiB) Viewed 1961 times
8.jpg
8.jpg (577.17 KiB) Viewed 1961 times
10.jpg
10.jpg (478.43 KiB) Viewed 1961 times
14.jpg
14.jpg (455.1 KiB) Viewed 1961 times
Rogueknight wrote:Figured I had to post to keep Stu moist....
User avatar
Stu Pidasso
Jedi Aspirant
Jedi Aspirant
 
Posts: 987
Joined: March 11th, 2013, 12:49 am

Re: NEW KIT PRE-ORDER: 1:350 EF-76 Medical Frigate

Postby Stu Pidasso » February 28th, 2017, 8:49 am

The first batch of pre-orders has been filled. Stay tuned, I'll announce when the next wave is ready! Thank you all who have supported me so far, it is most humbling!
Rogueknight wrote:Figured I had to post to keep Stu moist....
User avatar
Stu Pidasso
Jedi Aspirant
Jedi Aspirant
 
Posts: 987
Joined: March 11th, 2013, 12:49 am

Re: NEW KIT PRE-ORDER: 1:350 EF-76 Medical Frigate

Postby DJSLY » March 1st, 2017, 12:10 am

PM ;)
User avatar
DJSLY
Padawan
Padawan
 
Posts: 145
Joined: June 3rd, 2014, 11:33 pm
Location: CHANAY, Rhône-Alpes, FRANCE

Re: NEW KIT PRE-ORDER: 1:350 EF-76 Medical Frigate

Postby Stu Pidasso » March 1st, 2017, 3:32 am

I've been getting a few inquiries, and I thought I'd answer a few questions:

1) The first batch list is full. I only plan on doing one more batch of 10 after this one, then an "order stop" while I cast some for Wonderfest and make new molds. After Wonderfest, then I'll open it back up for more orders.

2) The KotF price listed above stands for all future orders from our members here. MAKE SURE, when you pay, to list your KotF username. It will be honored for members who joined before this date, Feb. 28th, 2017. 8-)

3) Shipping rates have been estimated and pictures are below. This is just a guide, I don't know what the final box size will be, the USPS likes to ballon that crap. If you live in Australia, it'll be cheaper to just fly yourself into the USA to buy one. lol


Any other questions, please feel free to ask.
Attachments
Canada ship.jpg
Canada ship.jpg (126.52 KiB) Viewed 1907 times
Germanyship.jpg
Germanyship.jpg (135.99 KiB) Viewed 1907 times
Great Britain shipping.jpg
Great Britain shipping.jpg (135.57 KiB) Viewed 1907 times
Rogueknight wrote:Figured I had to post to keep Stu moist....
User avatar
Stu Pidasso
Jedi Aspirant
Jedi Aspirant
 
Posts: 987
Joined: March 11th, 2013, 12:49 am

Re: NEW KIT PRE-ORDER: 1:350 EF-76 Medical Frigate

Postby dupes » March 15th, 2017, 2:42 am

Holy god. I had no idea this was finished until just a couple of days ago! Oooooooooh my walllllllllllet
Need to build 30 models per year until I'm 90 to clean out the stash. Time to get cracking!
User avatar
dupes
Jedi Knight
Jedi Knight
 
Posts: 1589
Joined: November 19th, 2013, 8:06 pm
Location: The snowy coast of Maine


Return to Mos Espa Factory Outlet

Who is online

Users browsing this forum: No registered users and 1 guest