Bandai Death Star

Show your finished models and 3D artwork here
Post Reply
User avatar
PhilCiborowski
Youngling
Youngling
Posts: 15
Joined: October 20th, 2018, 6:43 am
Location: Eastern MA, USA
Contact:

Bandai Death Star

Post by PhilCiborowski » May 7th, 2020, 5:33 pm

This build was more about painting than anything else! The kit was easy enough to assemble after painting, which took the most amount of time. I started off with a base coat of Nato Black followed by Dark Ghost Gray. After a gloss coat, I added the lighter areas with thinned Gull Gray put down in a few coats. Once dry the excess was carefully removed. The interior was just dry brushed with the exterior colors. Once the parts were dry, the kit was assembled and finally a matte coat was put on it.

The most annoying part were the seams and the trench not lining up along the parts.

Image
Image
Image
Image

Post Reply